export@adtechen.com

+86-755-2609-9116

STEP Robots
outdated products
home outdated products

ADT-836 PC104 BUS 6 Axis Motion Control Card SC

ADT-836 PC104 BUS 6 Axis Motion Control Card SC

ADT-836 PC104 BUS 6 Axis Motion Control Card ADT-836 is 6 axis PC104 control card. with the accuracy and repeatability for high speed motion control card ,it can support 2.3.4.6 axis linear interpolation and S- curve acceleration/deceleraton.
  • item no.:

    ADT-836
  • lead time:

    Within 3 days after payments received
  • product orgin:

    Shenzhen,China
  • shipping port:

    Shenzhen,China
  • payment:

    T/T, West Union
  • market price:

    $1
  • product details

Feature:

  • 32-bit PC104 bus, PnP;
  • Maximum pulse output frequency is 4MHz;
  • Pulse output mode: pulse + direction, pulse + pulse;
  • 6-axis servo/stepper motor control; each axis can control independently;
  • 2-6 axis linear interpolation ,arc interpolation,multi-axis continuous interpolation;
  • Linear or S-curve acceleration/deceleration;
  • Asymmetric linear acceleration/deceleration;
  • All the 6 axes have position(coder) feedback input; 32-bit counting; maximum frequency is 4MHz, maximum counting range: -2,147,483,648~+2,147,483,647;
  • 48-channel optical coupling isolation digital input, 32-channel digital output ,every axis contains 2 positive and negative limit signals;
  • The speed and target position can be changed in real-time in the motion process;
  • Read the logical position, real position, driving speed, acceleration and driving state in real-time in the motion process;
  • Each axis has 3 STOP signals, which are used to search for home and Z-phase of coder;
  • Each axis has two 32-bit compare registers, which can be used for software limit;
  • Each axis has 8 input signal, include 2 positive/negative limit signals,3 stop signals,1 servo in-position signal, 1 servo alarm signal and 1 general input signal. Except 2 limit signals, other 6 signals can be used as general input signals by setting them as invalid;
  • Position counter is integrated with variable cyclic function; the logical position counter and actual position counter are 32-bit up/down cyclic counters;
  • The input port of every input signal is equipped with integral filter. You can select to activate/deactivate the filter of certain input signal. Select one from the 8 constants for the filter time;
  • Receive signals from servo motor drive, e.g. coder Z-phase signal, in-position signal, alarm signal, etc;
  • Up to 16 motion cards can be used in one system, control 96 axis;
  • Support operating systems: DOS, WINDOWS95/98/NT/2000/XP,WINCE;


Function:

  • Pulse output:
    Mode of pulse output: six-channel pulse outputs, pulse/direction, pulse/pulse, maximum output frequency: 4MHz,uses advanced technology to ensure the error of pulse output frequency is still within 0.1% even it is in high level;
  • Coder input:
    Maximum input frequency: 4MHz;
    Phase difference pulse input or up/down pulse input of 6 axes A/B phase;
    Pulse frequency multiplication: 4, 2, 1;
    Noise removing of integration filter;
  • Digital switch input:
    48-channel optical coupling isolation input, every axis contains 2 positive and negative limit signals;
    Input voltage: 5-24V;
    Isolation voltage 2500VDC;
  • Digital switch output:
    32-channel open-collector output;
    NPN open-collector, 5-24VDC, maximum current: 100mA;
  • Control mode:
    Offer many kinds of control modes such as quantitative motion, continuous motion, back-to-home motion, multi-axis interpolation, arc interpolation ,and continuous interpolation,etc;
  • Continuous interpolation:
    Input the interpolation data of the next command during the interpolation so as to pre-process to ensure the continuity of pulse output, and thus making the interpolation smooth and successive to effectively improve the process precision;
  • Position management:
    The position is managed by two UP/DOWN counters: one is logical position counter used for managing the output of inner drive pulse, and the other is actual position counter used for receiving the input of outer pulse. It is either A/B phase input signal of coder or grating scale, or input signal of up/down pulse. As actual position counter, its bits can reach 32 and the maximum range is -2,147,483,648~+2,147,483,647. The outer input can also be used as hand wheel input for common counting;
  • Speed control:
    The speed control can be constant speed or linear/S-curve acceleration/deceleration. It may perform asymmetric linear acceleration/deceleration, automatic and manual deceleration. In constant driving process, it can prevent triangle wave caused by speed curve;
  • Development libraries and operating system:
    Support DOS, WINDOWS XP/2000/NT/98/95 and WINCE operating system;
    Support programming by developer such as C/BC++/VC/VB/C++Builder/Delphi/Labview/EVC;
    Applications based on DOS and Windows.


Parameters:

  • Operating temperature: 0~60°C
  • Storage temperature: -20~80°C
  • Humidity: 5~95% (no condensation);
  • Front plate dimension: 95×98mm;
  • Down back dimension: 156×97mm.

Applications:

  • Drilling machine
  • Punch machine
  • Automatic detection of electronic fitting
  • Automatic detection of press
  • Cutting and welding of semiconductor
  • All kinds of NC cutting
  • Industrial robot
  • Measure of space coordinates
  • Biological and medical auto-sampling and processing equipment

Request a free quote
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
related products
AC servo motor

High quality 400watt AC servo motor Incremental encoder WE

High-Overload Ability: three times overload to prevent the abrupt burn motor; Low Temperature: the temperature is less than 60 degrees in the rated speed & torque; Low Noise: running noise is less than 38dB in the rated speed & torque.

PMC Series Ethernet (Stand-alone) Motion Controller ADT-8840

PMC Series Ethernet (Stand-alone) Motion Controller ADT-8840 SC

PMC Series Ethernet (Stand-alone) Motion Controller ADT-8840 1. Supplies ARM7 processor; 2. Supports G code; 3. TCP/IP communication protocol, has most function of PLC; 4. I/O:38/22

ADT-TP3540 4-axis Motion Controller (touch screen)

ADT-TP3540 4-axis Motion Controller (touch screen) SC

ADT-TP3540 4-axis Motion Controller (touch screen) 1.Applies ARM9 and super FPGA control technology; 2.4-axis servo/step motion controller; 3.RS232, Ethernet ports;

ADT-8940A1 PCI Bus 4-axis Motion Control Card

ADT-8940A1 PCI Bus 4-axis Motion Control Card SC

ADT-8940A1 PCI Bus 4-axis Motion Control Card  ADT-8940 is 4 axis servo and stepping control card base on PCI bus,and can support random 2,3,4 axes linear interpolation. It can be widely applied in water cutting machine and other industries.

ADT-8948A1 PCI BUS 4 Axis Motion Control Card

ADT-8948A1 PCI BUS 4 Axis Motion Control Card SC

ADT-8948A1 PCI BUS 4 Axis Motion Control Card ADT-8948 has Successfully Passed CE Certification,it is 4 axis servo and stepping control card base on PCI bus,and can support 2,3 axes linear interpolation,random 2 axes arc interpolation Linear or S-curve acceleration/deceleration.

ADT-856 PCI BUS 6-axis Motion Control Card

ADT-856 PCI BUS 6-axis Motion Control Card SC

ADT-856 PCI BUS 6-axis Motion Control Card  ADT-856 is 6 axis and obtained CE approved PCI control card.Multi-profiling functions with the accuracy and repeatability for high speed motion control card ,and very compatible to DOS, WINDOWS95/98/NT/2000/XP, WINCE and Win7.

 
scan it
please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!