EN

DE

TR

RU

ES

FR

PT

PL

ID

VI

IT

NL

JA

KO

El

HU

MS

AR

TH

Home >Frequency inverter

Product Details

ADTS1000 solar power system including solar panel controller and battery SH

  • SHENZHEN,CHINA
  • ADTECH
  • ADTS1000
  • FOB

Product Details

Specification of Solar Power System









Operation instruction

1Press the main Switch, and turn on the air switch, status indicator light will turn blue, Power indicators turn on(all power indicator lights will turn on when full of power; or parts turn on between 25%~75%/25%~50%/25%), it shows systerm turn on normally.

2To take AC 220V load, please turn on ACoutput switch, then insert the 220V load directly to “AC 220V OUTPUT.

NoteDon’t load over max rated power 1000W or inductive load on AC 220V output.

3Please insert the load to “USB5V OUTPUT”or”DC12V OUTPUT”port to recharge cell phone \ digital or DC 12V LED light load.

4Systerm Recharged

4-1Solar power recharge

Before charging, please connect the wire of 18 v solar panels to the "SOLAR INPUT" port of the system,  (solar panels red wire connect the positive input port, the black connect the cathode input port), ensure the wire inserted normally and strongly.

Note:put the solar panels in sunny places facing the sun, first-rate moving follow to the sun’s move; Solar panel’s effective working time is 10 a.mto 3 p.m, make sure the solar panels face to the sun with 30 to 45 degree Angle with the ground, the cloud will influence the efficiency of solar power generation, but it can adapt to the weather, the more sunshine, the more power, it can be fixed in the outside, and face to the sun.

(4 - 2) Main AC Power recharge

Insert the triangular plug to “AC 220V INPUT” port, ensure the plug is insert normally and tightly. Then insert the other plug to the main socket.

(4- 3) the charging indicator light turns on when the system is recharging , and all the power indicators turn on when full recharged.

(4- 4) When recharging, please turn off the main switch to speed up recharging if no load.

( 5 )To add a maintenance-free lead-acid battery, please connect the battery to “BATTERY INPUT” port(“+”to”+”, “-”to”-”), note that the battery has no short connect protection. Don’t do the reverse connection, or the system will be damaged.

KeynoteThe voltage of external maintenance-free lead-acid battery can only take 12V, no capacity request.

6System protection

(6-1)When DC output too large or short circuit, the fuse will burnt and system will cut off all output, please replace 10A fuse to turn the system back to normal.

(6-2)When AC 220V output short circuit or too large, the fuse will burnt and system will cut off all output, please replace 2A fuse to turn the system back to normal.

(6-3)When AC 220V input current too large, the fuse will burnt and system will cut off all output, please replace 1A fuse to turn the system back to normal.

6-4)The system has overcharge and over discharge protection.

. Parameter Specification

Solar panel

18V solar panels lower than 300W(no-load21.5V)

Inverter

DC12V-AC220V 1000W Pure sine

Output volt

DC12V x 8 output portsMax output current5A

USB 5V 1A x2output ports

AC 220Vx2 output portsMax output current4A

Internal battery

12V100AHmaintenance-free lead-acid battery

Charging time

 Depends on recharge method

Recharging time

Depends on loading power

Rated charging current

20A

Rated discharge current

5A

System volt

12V

No-load loss

<50mA

Overvoltage

14.4V

Boost voltage

15V

undervoltage

11.6V

Overdischarge volt

10.5V

Control mode

rechargePWM(pulse width modulation)

Working temperature

-100C ~+550C

Overload/short circuit protection

10ms Response

Guard circuit

Overload/short circuit protection

Burn the fuse






Note: the system configuration specific in kind prevail.

. Attention

1.   Please read this manual carefully before using the product.

2.   Do not use parts or appliances that not meet product specification

3. Non-professionals can not be allowed to open the machine for maintenance, to avoid damage to the product.

4Note waterproof electric storage tank must be stored in a dry ventilated place.

5 do not use the system near fire or under high temperature conditions.

6Please full charge the battery before the first use. Don’t worry about overcharge problem with Internal overcharge protection. You can charge a long time.

7 Please electricity in rainy days or seasons, turn off the main switch when not in use.

8When the product is left unused for a long time, please fully charge the battery at least once a month.

Next:T8 Hot sales Spindle Vector Frequency Inverter seek for agent SH

ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.

Tel: +86-755-2609-9116
Fax: +86-755-2672-2718

Mobile:+86-15579618777

Website:www.machine-controller.com


Send your inquiry directly to us Email: Tel:(optional):

Related Products+More