-
فارسی
Русская версия 
中文 
-
-
- Question1: We are now testing ADT856 and it looks nice. I have some questions as following;
1.can we use inputs for jog operations.
2.can we use handwheel (manuel pulser) to inputs for jog operations.
3.has the adt-856 card already got inputs for jog and handwheel
Answer1: The card 856 have not that hardware function as you said , but we can realize it via software. The operation method as following:
1. Mechanical switch : mechanical switch connect one of input point of 856 card , when our card read the signal of input point, it will use “pmove” or “continue_move” to realize the impulse output.
2. Handwheel: Handwheel connect the feedback position of encode (P2 connection board of 856 card) , ( note: if any axis has connected handwheel ,it can not connect encode again).
3. Our card will use the function “get_actual_pos” to get impulse quantity , then send impulse by “pmove”.
- Question2: Is possible to put my company logo in (on ) the plasam controller HC4300 and HC6500?
Answer2: Of course, you can put your LOGO and Company name in the controller HC6500 and HC4300. You just provide us with your correct logo, then our development engineer can edit it for you specially. When you start to the controller, you can look at your logo in start interface.
- Question3: Is possible to translate the menu in Romanian? I can make this?
Answer3: Certainly, you can translate the menu in Romanian or other language by yourself.
- Question4: I want to buy the plasma controllerHC4300, what is inclued in the package?
Answer4: The package will include the controller and accessories and Manuals. Also, there is application program in controller before delivery. For the package, you can rest assured, I have sent many the controller to other countries. Before we deliver it, there is special packer for the controller.
- Question5: Base on your milling controller CNC4240, whether ATC（automatic tool change）function to the machine ?
Answer5: The ATC（automatic tool change）function has been added to the program, please you write M06T5 code in the range of G code, then you can use ATC function, about the detail operation, please you refer to manual Chapter 5.
- Question6: For 4 axis milling controlelr CNC4240, Can you please, describe us the macros of the ATC? We cannot find it anywhere.
Answer6: Tool change executive "Tn M06",“n”means tool number, may be is T1 or T2, and so on.
- Question7: I need your servo motor for our machine, please quote me.
Answer7: Before I quote you, please tell me what technical parameter request for your motor and driver? And finish as following form:
| Model |
Rated torque (KW) |
Rated torque(NM) |
Peak torque(NM) |
Rated current(A) |
| |
|
|
|
|
- Question8: For economic plasma controller HC4300, Is it possible for you to just send us some example of the G-codes? Please, ask the programmer (engineer) to create some small sample of the program (square, circle) and send to us.
Answer8:
Please you check it as following:
G92X0Y0
G91
G42
M07
G01X10.Y0
G01X100.00Y0
G01X0Y100.00
G01X-100.00Y0
G01X0Y-100.00
G01X0Y-10.00
M08
G40
G28
M02
- Question9: The technician stuck with a problem of how to connect the CN2 socket with a motor?
Answer9:
- Question10: we need to use 4 axis to do the dispensing, for your dispensing controller TV5500, whether it have the fourth function ? My dispensing machine need double function.
Answer10: Sure, our dispensing controller TV5500 has fourth function ,but the fourth axis has been defined as rotating function. For your double function, there is another dispensing controller TP3340DJ that is four axis controller and the fourth axis specialized to double function.
- Question11: How to convert Chinese interface to English version of HC6500 plasma controller ?
Answer11: The processing as following:
- Question12: How to update software or program of HC6500 plasma controller?
Answer12: The processing as following:
